Panasonic Medium-Temp Hermetic Condensing Unit 3-4HP Side Blowing
【Flexible Installation, Integrated Structure】
Flexible Installation: Integrated enclosed structure allows top or side mounting, compatible with multi-power models.
【High Ambient Tolerance up to 48 ℃】
High-Temp Resilience: Inner-grooved copper tubes and hydrophilic aluminum fins, spray cooling control, and high-airflow fans support ambient temps up to 48℃.
【Smart Control for Full-Scenario Reliability】
Smart Control System: Branded intelligent control enables precise temperature management, multi-layer protection, and fault diagnostics for lifecycle reliability.
【Quiet Low-Noise Operation】
Quiet Operation: Lightweight compressors, sound-absorbing foam, low-noise fans, and optimized piping design minimize operational noise.
【Proven Market-Validated Reliability】
Proven Reliability: Market-validated technology and robust components ensure consistent performance in long-term, complex operating environments.
【High Efficiency with Genuine Panasonic Scroll Compressor】
High Efficiency & Energy Saving: Equipped with Panasonic specialized scroll compressor for refrigeration, enhancing compression efficiency and significantly reducing energy consumption.
| Panasonic Refrigeration Fixed Frequency 3-4HP Side Blowing Air Box Type Integrated Unit Technical Parameters (R404A) | ||||
|
Unit Model |
CAM31P01-030 |
CAM31P01-040 |
||
|
Power Supply |
3PH, 380V/50Hz |
|||
|
Nominal Power |
3HP |
4HP |
||
|
Maximum Operating Current of the Unit |
9.5A |
9.5A |
||
|
Refrigerant |
R404A |
|||
|
Evap. Temp |
-30-+10℃ |
|||
|
Ambient Temp |
-15-+48℃ |
|||
|
Compressor |
Model |
3CB052SA0M |
3CB067SA0M |
|
|
Cooling Method |
Electronic expansion valve auxiliary liquid injection cooling |
|||
|
Crankcase Heater |
PTC |
|||
|
Refrigeration Oil |
Type |
FV68S, POE |
||
|
Charge Quantity |
1.7L |
1.7L |
||
|
Condenser |
Number of Fans |
1 |
1 |
|
|
Fan Blade Diameter |
450 mm |
450 mm |
||
|
Fan Power |
180W |
180W |
||
|
Heat Exchange Area |
34㎡ |
46㎡ |
||
|
Structure and Material |
mm internal thread copper tube + hydrophilic aluminum foil, L-type. |
|||
|
System Components |
Oil Separator |
N |
N |
|
|
Gas-liquid Separator |
N |
N |
||
|
Liquid Receiver |
4L |
4L |
||
|
Sight Glass |
Y |
Y |
||
|
Filter Drier |
Y |
Y |
||
|
High and Low Pressure Gauge |
Y |
Y |
||
|
HP/LP Pressure Switch |
Saginomiya, automatic reset, high pressure 30 bar protection. |
|||
|
Electrical Control |
Circuit Breaker |
CHINT |
||
|
AC Contactor |
Schneider, LC1D series. |
|||
|
Control Board |
Phase loss and phase error, overcurrent/transformer detection, exhaust temperature protection + liquid injection electronic expansion valve control, condensing fan speed regulation, fault code display, RS485 communication, etc. |
|||
|
Shut-off Valve Size |
Liquid pipe 1/2, suction pipe 3/4 |
|||
|
Outer Dimensions |
1058*450*830 mm |
|||
|
Unit Net Weight |
86 kg |
88 kg |
||
|
Unit Operating Noise @1m |
55 dB |
55 dB |
||
|
Recommended Wiring Capacity |
4mm2 |
4mm2 |
||
|
Cooling Capacity |
Evaporation Temperature |
Ambient temperature +38℃, subcooling temperature 0K, suction temperature +5℃. |
||
|
-20 |
3550 |
4550 |
||
|
-15 |
4250 |
5450 |
||
|
-10 |
5050 |
6550 |
||
|
-5 |
6050 |
7850 |
||
|
0 |
7550 |
9750 |
||
|
5 |
9250 |
11900 |
||
|
10 |
11100 |
14300 |
||
This series includes 2 models:
• CAM31P01-030 — 3HP, 86 kg
• CAM31P01-040 — 4HP, 88 kg
• Convenience stores / supermarket back rooms — 3HP suits 10-20 m³ medium-temp cold rooms
• Meat & deli refrigeration rooms — 4HP suits 15-25 m³
• Fruit & vegetable storage — Constant 0 to 5 ℃ freshness preservation
• Beverage & dairy storage — Refrigeration for supermarket drinks
• Power supply: 220V single-phase / 380V three-phase customizable
• Refrigerant: R404A standard, switchable to R449A / R448A
• Remote monitoring: IoT controller + mobile remote monitoring optional
• Anti-corrosion coating: Reinforced coating optional for coastal / highly corrosive environments
