Cold Room Integrated Unit 1.5-5.5HP Wall-Mounted

Short Description:

All-in-One Plug & Play Cooling — Compact Wall-Mounted Solution for Small to Medium Cold Rooms

Quick Specs:

• Compressor: Highly hermetic compressor

• HP Range: 1.5 – 5.5 HP

• Evap Temp: -40 to +10 ℃ (freezer & cooler)

• Refrigerant: R404A

• Power Supply: 1.5-3.5HP: 1PH 220V-50/60Hz; 4.5-5.5HP: 3PH 380V-50/60Hz

• Structure: Wall-mounted, L-type side blowing

• Mounting: Wall mounting (bracket included), no floor space required

Send email to us

Product Detail

Product Tags

Brief Introduction

【1.5-5.5HP, Single or Three Phase Optional】

Diverse Models: 1.5-5.5HP power options, voltage configurations of 1PH 220V or 3PH 380V.

【High-Efficiency Inner-Grooved Copper Tube + Hydrophilic Aluminium Foil for Rapid Pull-Down】

High-Performance Cooling: High-efficiency inner-grooved copper tubes and hydrophilic aluminum foil condenser with electronic expansion valves.

【Smart Control + Hot Gas Defrost for Energy Saving】

Energy Efficiency: Smart electronic control with auto hot gas defrost reduces energy use. Adaptive fan speed based on condensing temperature.

【Wall-Mounted, Ready to Use, Saves Installation Cost】

Labor Cost Savings: Wall-mounted integrated design enables direct installation, reducing labor expenses.

Technical Specifications

Panasonic DC inverter box-type integrated unit technical parameters
Model			CAM31P01-600V	CAM31P01-840V	CAM31P01-168V	CAL31P01-840V
Power supply			3PH, 380V/50Hz
Nominal power			6HP	8HP	16HP (8HP × 2)	8HP
Maximum operating current of the unit			15A	19A	40A	19A
Refrigerant			R404A
Evaporation temperature range			-30-+10℃			-40--5℃
Ambient temperature range			-15-+48℃
Compressor	Model		3CB062ZA0M	3CB084ZA0M	3CB084ZA0M*2	3CB084SA02
	Cooling method		Electronic expansion valve assisted liquid injection cooling			Jet enthalpy increase
	Crankcase heating belt		PTC
	Refrigeration oil	Type	Ester oil
		Charge amount	2L	2L	2L*2	2L
Condenser	Number of fans		2	2	2	2
	Fan blade diameter		460 mm	500 mm	580 mm	500 mm
	Fan power		160W	180W	320W*2	180W*2
	Heat exchange area		64㎡	97㎡	197㎡	97㎡
	Structure and materials		mm internally threaded copper tube + hydrophilic aluminum foil, L-shaped, 168V is U-shaped.
System components	Oil separator		Y	Y	Oil storage type	Y
	Gas-liquid separator		Y	Y	Y	Y
	Reservoir		6L	10L	16L	10L
	Sight glass		Y	Y	Y	Y
	Filter drier		Y	Y	Y	Y
	High and low pressure sensors		Y	Y	Y	Y
	High and low voltage switch		Automatic reset, high pressure 30 bar protection.
Electronic control	Breaker		Chint, or load switch
	Speed range		30-90rps
	Control panel		Drive module + BLDC motor drive, filtering, reactance, overload, phase sequence/phase loss, excessive exhaust temperature, high and low pressure pressure sensors, and complete electrical safety protection.
Globe valve size (liquid pipe/air pipe)			1/2", 7/8"	5/8", 1-1/8"	5/8", 1-3/8"	5/8", 1-1/8"
Overall dimensions			10584501380	12505601480	153011001390	12505601480
Unit weight			135 kg	168 kg	280 kg	170 kg
Unit operating noise@1m			55 dB	55 dB	58 dB	59 dB
Recommended wiring capacity			4mm2	4mm2	6mm2	6mm2
rps) Refrigeration capacity	Evaporation temperature℃		Ambient temperature +38℃, subcooling temperature 0K, suction steam temperature +5℃			Suction steam temperature 0℃
	-20		5550	7400	14800	-40/5450
	-15		6600	8800	17600	-35/6850
	-10		7870	10500	21000	-30/8400
	-5		9520	12700	25400	-25/10100
	0		11620	15500	31000	-20/12100
	5		14200	19000	38000	-15/14300
	10		17400	23200	46400	-10/16900